Hubs
Scorpion hubs are carefully designed with commonsense feature and serviceable at any LBS without requiring any special tools or proprietary parts.
Choose from J-Bend for simplicity or Straight pull for stiffness and durability
Choose from J-Bend for simplicity or Straight pull for stiffness and durability

Scorpion RS400
Simple classic design with commonsense features.
Three pawls double side by side and large flanges
J bend, capable of accommodate up to 4mm aero bladed spokes
One piece axle from end to end to improve stiffness. End cups do not support the load, like many hubs out there, they are just to cover the bearings and provided a seal from the environment.
No plastic or rubber cups here, all metal
Large outboard bearing 6001 on rear and 6900 front 400g per set
This hub is a thru axel design. A one piece axel from end to end
MSRP $199
Simple classic design with commonsense features.
Three pawls double side by side and large flanges
J bend, capable of accommodate up to 4mm aero bladed spokes
One piece axle from end to end to improve stiffness. End cups do not support the load, like many hubs out there, they are just to cover the bearings and provided a seal from the environment.
No plastic or rubber cups here, all metal
Large outboard bearing 6001 on rear and 6900 front 400g per set
This hub is a thru axel design. A one piece axel from end to end
MSRP $199

Scorpion RS350
Did we say they are loud?
Straight pull spokes
2:1 rear
6 Pawls 72 point engagement, very quick almost no slack
3 cross spokes on drive side
This hub builds a very stiff wheel with a nice buzz sound as the
6 pawls roll on the 72 points
Large 72mm drive side flange 3 cross spokes on drive side
350g
MSRP $249
Did we say they are loud?
Straight pull spokes
2:1 rear
6 Pawls 72 point engagement, very quick almost no slack
3 cross spokes on drive side
This hub builds a very stiff wheel with a nice buzz sound as the
6 pawls roll on the 72 points
Large 72mm drive side flange 3 cross spokes on drive side
350g
MSRP $249
Industry Nine hubs
Velocity hub

Long time OEM company established in USA
Affordable pricing, good design and quality
Rear hub features a large flange on drive side 62mm to better dish the
wheel and widen the spoke distance for stiffer wheel from side to side
and J bend for simplicity and service.
Available in 20 / 24 hole only